ʻO ka hoʻoheheʻe ʻana i ka ʻoki ʻoki ʻoki ʻoki ʻia ʻO ka poʻi wela kiʻekiʻe |Ka lā

'O ka ho'oku'u 'ana i ka po'i a me ke ki'eki'e wela o ka mea PPSU i 'ike 'ia

ʻO ka wehewehe pōkole:

• 4 lua, PPSU mea

• kiʻekiʻe kiʻekiʻe wela hoʻoheheʻe ʻia i loko o ka ʻiʻo, hoʻoheheʻe auto-unscrewing.

• Loaʻa iā mākou nā makahiki o ka hana ʻana i ka mold no ka hoʻoheheʻe auto-unscrewing a me ke kiʻekiʻe wela

• No ka mea PPSU, hiki i ke ana wela ke hiki i ka 160 ~ 180 degere

• Kiekie precision poni me ka hoʻomanawanui emi ma mua o +/-0.02mm

E hoʻouna i ka leka uila iā mākou

kikoʻī

Huahana Huahana

Hoʻolauna Huahana

• Ka kiʻekiʻe wela kaʻa unscrewing papahana i mold wela o 160 degere a me resin wela o 380 degere.

• He 35 kekona ka manawa holo o keia 4 lua me ka nee unscrewing loa.

• Part he kiʻekiʻe tolerance me ka emi mai+/-0.02mm.

• Hoʻohana ʻia nā ʻāpana i nā ʻōnaehana wai kai hohonu.

ʻO ka ʻāpana o kahi hihia no ka ʻōpala hoʻoheheʻe kaʻa?

Nānā nui

Mea Hana a me ke ʻano		ʻO nā huahana ʻōnaehana wai e wehe kaʻa i ka 4 cavity mold, PPSU material, kiʻekiʻe wela wela
inoa hapa		MINI PISTON
Resin		PPSU
No. o ka lua		1*4
Kumu Mold		LKM S50C
Steel of cavity&Core		H-13 HRC48-50 /H-13 HRC48-50
Kaumaha mea hana		430KG
Ka nui o ka mea hana		493X454X440
E kaomi iā Ton		120T
Ola mold		800000
Pūnaehana hoʻopio		ʻO ka mea hoʻoheheʻe anuanu
Pūnaehana hoʻoluʻu		160 ℃
Pūnaehana Ejection		wehe ʻia e ka huila kaʻa a me ka huila
Nā kiko kūikawā		ʻO ka mahana wela 160 ℃, ka mahana o ka mea 380 ℃
Nā pilikia		ka wehe ʻana i ka maʻalahi, ka manawa pōʻai 39'S， hoʻomanawanui +/-0.02mm.
Ka manawa o waena o ka hoʻomaka a i ka wā pau		5 pule
Pūʻolo		Ka Pepa Anti-rust a me ke kiʻiʻoniʻoni, ka ʻaila anti-rust liʻiliʻi a me ka pahu plywood
Hoʻopili i nā mea		ʻO ka hōʻoia ʻana o ke kila, ka hoʻolālā mea hana 2D & 3D hope loa, ka palapala holo wikiwiki, nā ʻāpana ʻokoʻa a me nā electrodes…
Hoʻoemi		1.007
Hoʻopau ʻili		B-2
ʻŌlelo kālepa		FOB Shenzhen
Hoʻokuʻu aku i		Nuhōlani

Nā kikoʻī hou aku

• Hoʻokuʻu ʻokoʻa ʻia ka mea hoʻoheheʻe injection e ka huila kaʻa a me ka huila.

• Nui nā papa insulation i loko o ka mold ʻehā ʻaoʻao e like me ke kiʻekiʻe loa o ka mahana.

• He 35 kekona ka nui o ka hoʻoheheʻe ʻia ʻana o kēia lua lua a ʻoi aku ka emi o ka ʻae ʻana ma mua o +/- 0.02mm.

E noi i kahi ʻōlelo hoʻopuka koke

Nā mea e pili ana i ka wehe ʻana i ka mold injection

He aha ke ʻano o ka hoʻoheheʻe ʻana i ke kaʻa?

ʻO ka hoʻoheheʻe auto unscrewing injection kahi kaʻina hana e hoʻohui i ka hoʻoheheʻe ʻana o nā mea plastik me ka wehe ʻana a me ka wehe ʻana i nā kaula wili (waho a i loko a i ʻole nā mea ʻelua) mai nā ʻāpana i hoʻoheheʻe ʻia.

Hoʻohana ʻia kēia kaʻina hana no ka hana ʻana i nā mea like me nā brackets, knobs, fasteners, caps, valves a me nā mea hou aku.

Aia i loko o ka mold injection auto-unscrewing kahi pā sprue a me ka pā kumu a me kahi mea hana wili e hiki ai ke wehe ʻakomi ma hope o ka maʻalili o ka ʻāpana.

Hoʻopau kēia kaʻina hana i ka pono no ka wehe lima ʻana i nā ʻāpana i hoʻopaʻa ʻia e like me ka hana maʻalahi i ka wā i hoʻokuʻu ʻia ai ka ʻāpana mai ka lua mold.

ʻO nā mea maikaʻi o nā mold injection auto-unscrewing me ka mālama ʻana i nā kumukūʻai ma muli o ka hoʻemi ʻana i nā koina hana, ʻoi aku ka maikaʻi o ka huahana mai ka liʻiliʻi o ka lawelawe lima ʻana, hoʻonui ʻia ka palekana no ka mea e hoʻopau ana i nā hewa kanaka i ka wehe ʻana i nā wili, a me ka hoʻonui hou ʻana a me ke kūpaʻa ma muli o kahi lole. kaʻina hana ʻakomi.

Hoʻohui ʻia, hiki ke hoʻohana ʻia kēia kaʻina hana e hana i nā ʻāpana me nā geometries paʻakikī e like me nā loina kūloko a i ʻole nā wili countersunk me ka ʻole o nā kaʻina hana hou e pono ai ma hope.

Manaʻo manaʻo hoʻolālā

3D mold design

ʻO ka hoʻolālā ʻana no ka ʻōpala wehe kaʻa

Pono e noʻonoʻo pono i ka huahana, ka mea plastik, a me ka nui o ka mea hana no ka hoʻolālā ʻana i kahi mold injection unscrewing auto.ʻO nā haʻina maʻamau no ka hoʻoheheʻe ʻia ʻana o nā kaʻa i loko o ka hoʻokomo ʻana i ke kaʻa e ka rotary, rack, a i ʻole ilo.

I ka hoʻolālā ʻana i kahi mold injection unscrewing auto, he mea nui e noʻonoʻo i ke ʻano o ka huahana, ke anawaena o ke kaula a me ka lōʻihi, ka mānoanoa o ka paia a me ka helu ʻana i ka emi ʻana, ke ʻano o ka plastic a me nā mea hoʻopihapiha i hoʻohana ʻia i ka mold injection.Hoʻohui ʻia, pono paha kahi ʻaoʻao ʻaoʻao no ka hoʻoponopono ʻana i kekahi mau pilikia e kū mai ana i ka wā e wehe ai a pani ʻia ai ka ʻōpala.No ka hoʻokē ʻai ʻana i ka manawa pōʻaiapili me ka loaʻa ʻana o nā hopena maikaʻi, hoʻohana pinepine ʻia nā ʻōpala unscrewing.

Aia nā ʻano ʻelua: ka wehe ʻana i ka manual (demold e ka ikaika) a me ka wehe ʻana i ka ʻakomi.ʻO ka wehe ʻana i ka manual he haʻahaʻa ka huahana, akā maʻalahi ke ʻano o ka mold a kūpono no ka hana liʻiliʻi;ʻO ka unscrewing maʻemaʻe he kiʻekiʻe ka maikaʻi a me ka maikaʻi paʻa a kūpono no ka hana nui ʻana.I loko o ka ʻōnaehana unscrewing mold, pono e hoʻoponopono ʻia nā pilikia o ka hilinaʻi, kūpaʻa a me ka pono o ka hoʻolālā hale.

• Ka nānā 'ana i nā'āpana'ilika: Ka nānā 'ana o DFM no ka nānā 'ana i nā'āpana no ka mea paahana a loa'a ka hopena e ho'opakele ai i ke kumu kū'ai.

• E koho i ka ʻōnaehana holo: inā he nui ka nui o ka hana a he kiʻekiʻe ka maikaʻi, ʻo ke kukini wela (e like me ka puka valve) he kūpono a pono.

• Hooluu:

I mea e hoʻomaikaʻi ai i ka hana pono, pale i ka deformation o nā ʻāpana plastik, a pale i ka pipili ʻana i ka lua i hoʻonui ʻia e ka hoʻonui ʻana i ka wela o nā ʻāpana mold, pono e lawa a hilinaʻi ka ʻōnaehana hoʻomaha.

• Mold mea koho: maʻamau, koho mākou mold mea me kiʻekiʻe lole pale a me hardenability mea.Ma kēia papahana, ua hoʻohana mākou i ke kila H13.

• Mold drive part design: loaʻa maʻamau 3 ala e hoʻolālā i ka ʻāpana hoʻokele, ʻo ia ka Hydraulic cylinder + rack, Motor + Chain a me Rack + Gears.

Hana maikaʻi loa kā mākou mau mea hoʻolālā, no ka DFM, ua hoʻopau ʻia i loko o 2 mau lā, no ka mea ua wikiwiki loa ka papahana, no laila pono nā mea kūʻai aku e hana pololei i ka hoʻolālā 3D, ʻaʻohe pono e hana i ka hoʻolālā 2D, no laila ua pau ka 3D i loko o 3 mau lā.

Loaʻa iā mākou nā mea hoʻolālā 6 me ka ʻike ma mua o 8 mau makahiki i ka hale.A loaʻa iā mākou nā hoa hana hoʻolālā akamai a no ka ʻoihana hoʻolālā a me nā ʻāpana hoʻolālā ma ke ʻano he kākoʻo ke ʻae ʻoe e ʻae iā mākou e noi i ke kōkua.

FAQ

No ka wehe ʻana i ka ʻoki ʻoki ʻana i ka hana

1. He aha ka mahana o ka mold no kēia kaʻa unscrewing PPSU injection mold?

ʻO ka mahana wela he 160-180 degere.

2. Pehea e pili ana i ka hoʻomanawanui ʻana no kēia ʻāpana lua 4 mai kahi ʻōpala wehe?

Mold: +_0.01mm,

Māhele Palaki: +_0.02mm

Huahana mīkini: +_0.005mm.

3. He aha nā mea āu e hoʻohana maʻamau ai i loko o ka ʻeleʻele i hoʻoheheʻe ʻia a me ka hoʻoheheʻe make?

No ka hoʻoheheʻe ʻia ʻana o ka ʻili, hoʻohana mākou i nā mea ilika me PPSU, PEEK, ABS, PC, PC + ABS, PMMA, PP, HIPS, PE(HDPE, MDPE, LDPE).PA12, PA66, PA66+Uila aniani, TPE, TPR, TPU, PPSU, LCP, POM, PVDF, PET, PBT…

A no ka hoʻolei make, ʻo ka mea alumini ka mea maʻamau A380, A356,6061.

4. He aha ka manawa alakaʻi e hoʻolālā ai i kahi mold injection ma Suntime Precision Mould?

DFM: I loko o 2 lā hana.
2D mold layout: maʻamau i loko o 3-4 lā hana.
3D mold kiʻi: maʻamau i loko o 4-5 lā hana.

5. Aia ma hea ka SPM ma ke ano he mea hoolako mea hana?

Aia kā mākou hale hana ma Chang An kūlanakauhale ʻo Dong Guan City ma ka hema o Kina, ʻo ia ka wahi hana mua.10 minuke i Shen Zhen.30 mau minuke i ke kahua mokulele ʻo Shen Zhen.

6. Pehea e pili ana i ke akamai kamaʻilio o ka hui SPM?

a).E hahai ana nā mea kūʻai a me nā ʻenekinia waiwai i ka papahana a kamaʻilio ma ka ʻōlelo Pelekania akamai.

b).24/7 kaila lawelawe.Hoʻokahi a hoʻokahi hoʻokele papahana.

c).E hele mai e kipa i kēlā me kēia manawa a kipa ka hui Suntime i nā mea kūʻai aku i kēlā me kēia makahiki.

d).hōʻike pule i kēlā me kēia Pōʻakahi.(2 hōʻike i ka pule inā pono).

e).ʻO nā leka uila e pane i loko o 24 mau hola, hiki iā ʻoe ke kelepona iā mākou i kēlā me kēia manawa, ʻoiai i ke aumoe.